SKU: CBK

Automec Land Rover Series 1/2/3 Brake Pipe Kits

Rated 5/5 based on 1 reviews.
$260.00
Sold Out


Calculate Shipping

Copper Nikel Brake Pipe Set Kits

 

Land Rover Series 1

Land Rover Series 2

Land Rover Series 3

Land Rover 90/110/130

Price Indicated is for the lowest priced kit in a range of over 200 combinations. Landybitz are now the sole Agents for Automec Automotive Equipment & Parts within Australia. Automec are a British company who have been in business for over 37 years.

We offer the full range of UK made brake pipe sets, specialist application brake pipes, individual brake pipes, copper & copper nickel coils, Flaring Tools, brass unions, ready made fuel feed kits, and the full range of ABA Zinc Plated hose clips single item or dispenser kits.

Brake Pipe Kits are available for all series vehicles, civilian and military, defenders, discovery and range rover.

The range is vast and covers anything from a mini, ford to such diverse vehicles as the jaguar Pontiac and Morris Minor. We have also decided only to sell the copper nickel sets here in Australia, these are more suited to our conditions. and ADR Approved.

Each pipe is cut to the correct length, fitted with solid brass unions and marked clearly to indicate the correct location on the vehicle. Pipe fitting clips and brass in-line connectors are supplied where necessary.

The Automec brake pipe sets are developed to be application specific ensuring easier installation and come complete with pipe clips and brass fittings making the kits virtually corrosion proof.

The kit range provides optimum braking performance and have been tested beyond 10,000psi, double the SAE pressure standard for brake hoses. Our copper nickel brake pipes have a burst pressure of 60% higher than that of copper and are also TUV approved. Images for reference only, kits may vary from photo shown. 

IMPORTANT NOTE: Due to the vast variations in brake setups available, we will require as much info as possible about the car.

Please let us know when ordering: the Model, Year, RHD or LHD, if the car has ABS, SERVO Etc. And any modifications.

This price is Based on our base kit. Different kits have different costs.

You may also want the reservoir pipe add $40 if required.

We also have every other Land Rover Brake pipe kits

 

Technical

 

COPPER NICKEL BRAKE TUBE DATA SHEET

 

Specification

We 90/10 Cupro Nickel,  which conforms to BS 2871 part 3, CN102 as well as BS EN 12451.1999. This material is 100% electrically and pressure tested. Every batch is also destructively tested for tensile and burst pressure results. Residue testing to BLS.30.JC.101 is also carried out on every batch to ensure cleanliness standards are met.

 

Working pressures 22g = 0.028” = 0.71mm 90/10 Cupro Nickel

 

O.D.      Recommended maximum working          Theoretical burst pressure

              Lb/in/in                     Bar                          lb/in/in                            Bar

3/16”     3100                          214                          14000                           1065

¼”         2250                          155                          9500                               770

5/16”     1740                          120                          7500                               600

3/8”       1450                          100                          6000                               500

½”         1090                            75                          4000                               370

 

(This is not applicable to thin walled copper ie 22g = 0.028” = 0.71mm, which should not be used for brake systems)

 

Dimension tolerances

Outside diameter +/- 0.002” = 0.051mm

Wall thickness 22g = 0.028” = 0.71mm +/- 10%

The length tolerance for coils of 25ft = 7.62m is –0.05m + 0.10m

 

Ink Jet Marking of Brake Tube

All coiled brake tube and most straight lengths of brake tube supplied by us are ink jet marked for full tracibility. The mark consists of a message repeated after every 4 to 6 inches along the length of a coil containing the following information:

 

1.     Metal batch number, e.g. M1580 could be suffixed by one letter. This is also repeated within the message.

 

2.    Size and material reference, e.g. 3/16” x 22g cupro nickel  

 

3.     Time and date by 24-hour clock and a sequential day/year reference, e.g. 14.53 288/6. (It is possible for there to be two different times on the tube)

 

4.     “Automec” inkjet marked every 4”

 

An example of a Cupro Nickel would be:

M1580  3/16”x22g   M1580   10.42   116/8

 

 

(CBK)

SKU CBK
Brand Automec
Shipping Weight 1.2000kg
Shipping Width 0.250m
Shipping Height 0.060m
Shipping Length 0.300m
Shipping Cubic 0.004500000m3
Unit Of Measure ea

Automec Land Rover Series 1/2/3 Brake Pipe Kits

22 December 2019
All Good Dean
(5)

Write a product review


Others Also Bought


$120.00 $95.00

Not yet rated
SKU: DA6047

Land Rover Series 2/2a/3 Long Wheel Base Rear Brake Kit

$75.00

SKU: STC8283DA2014

Land Rover Series Front Bulk Head Out Rigger

$8.00

SKU: RTC210

Land Rover S2/S3/Defender Tail Lens Red

$280.00 $240.00

SKU: GB-5592

Land Rover Series 1 86" Brake Pipe Kit


More From This Category


$150.00 $69.00

Not yet rated
SKU: LR017960-A

Land Rover Defender/Discovery/RR Rear RH Brake Disk Shield

$560.00

SKU: LR013018G

Land Rover Defender Genuine Brake Master Cylinder Kit

$150.00 $69.00

SKU: LR017961-A

Land Rover Defender/Discovery/RRC Rear LH Brake Disk Shield