Land Rover Series 2/3LWB 3/4 Canvas Hood
Fits from behind the front cab to the rear of the vehicle on all Long Wheelbase 109” Land Rovers
CAB FIT: The Hood fits around the rear window on the back of the cab with a goal post metal channel and allows access from the cab compartment to the rear boot when the hood is fitted.
We are fortunate to retain all the original drawings for these hoods dating back to production and original design, enabling us to still manufacture the correct hood.
Lew Gostling was the man behind the design and production of these hoods at Land Rover back in their heyday.
Today we still follow the same methods of manufacture and ensure that the Hoods are correct to the OEM fitted parts of that era.
We use a high-grade window to reduce the risk of cracking or smoking and all our windows are edge finished with the correct tape that was used in production to finish the inside face.
All the hoods of this era had Vinyl fuel splash panels which protected them from over spill of petrol or diesel which helped to prevent this area from losing its proofing and colour. These you can see on the hoods as black vinyl patch above the fuel tank filler.
All the buckles and tips are solid brass and we only use nickel plated brass eyelets.
All our 109” 3/4 Hoods have a rear window as standard and we also offer the option of “WSW” With Side Windows. Whichever 3/4 version you choose we only fit the roll up straps to the rear curtain panel which enables you to roll up the rear panels when required, a truly great way to enjoy a Land Rover.
Please note that as with all Long Wheelbase hoods if you choose the WSW option it has two windows per side panel so a total of five windows.
We use a 100% Natural Cotton Fibre for Exmoor Canvas Hoods and we have a lot of input into this material at the point of production.
Exmoor’s 18oz Natural Cotton Canvas over the years has changed with many of the old chemicals used in the past, no longer being used.
The Chemicals we now use are very environmentally based and many are organic, for us this is a big factor and part of our environmental strategy.
We appreciate that this does reduce the life span of the product compared to the heavily treated canvas of the past.
We pre-shrink the canvas and this helps to reduce the onward shrinkage when the product is in use, however if the hood when fitted is not kept lashed down in wet conditions shrinkage can occur please read the fitting instructions and care guide notes and watch our very handy video for fitting the correct way.
We see many hoods poorly fitted so watching our fitting guide to aid the life of your hood is a good tip.
These Original pattern hoods are designed to fit Original Galvanised style hoop sets.
As with all 100% Natural Fibre product it will fade over time and will have some shrinkage, the patterns allow for shrinkage and to increase the life span of your Exmoor hood make sure you follow the care instructions with the do’s and don’ts.
Please Note Thes have a lead time of 6/8 weeks and are made to order.